Nikon COOLPIX L105 User Manual

54
Auto Mode
More on Shooting
Preset Manual
Preset manual is used with mixed lighting or to compensate for light sources with
a strong color cast (for example, to make pictures taken under a lamp with a red
shade look as though they had been taken under white light).
1 Place a white or gray reference object under the lighting that is used
during shooting.
2 Display the shooting menu (A 34), use the
multi selector to select b Preset manual in
the White balance menu, and press k.
The camera zooms in.
3 Select Measure.
To apply the most recently measured value for preset
manual, choose Cancel and press k. The most recently
measured value is applied for white balance.
4 Frame the reference object.
5 Press k.
The shutter is released (no image is captured) and the new white-balance value is set.
Exit
Auto
Auto
Preset manual
Incandescent
Incandescent
Fluorescent
Fluorescent
Daylight
Daylight
White balance
Auto
Incandescent
Fluorescent
Daylight
Cloudy
Cloudy
Cloudy
Measure
Cancel
Preset manual
Exit
Measure
Cancel
Preset manual
Exit
Reference object frame
B Note on Preset Manual
T
he camera cannot measure a white balance value for when the flash fires. When shooting with the
flash, set White balance to Auto or Flash.

Nikon COOLPIX L105 Specifications

General

Sensor Resolution	12.1 MP
Optical Zoom	15x
Digital Zoom	4x
Image Sensor	CCD
Video Recording	Yes
Sensor Type	CCD
Effective Pixels	12.1 million
Display Size	3.0 inches
Battery Type	AA
ISO Sensitivity	80-1600
Lens	NIKKOR
Maximum Aperture	f/3.5-5.4
Image Sensor Size	1/2.3 inch
Lens Type	Zoom lens
Focal Length	28-420mm (35mm equivalent)
LCD Monitor	3.0-inch TFT LCD
Storage Media	SD memory card
Continuous Shooting	Single (default setting), Continuous H (up to 3 frames continuously), Continuous L (up to 6 frames continuously)