Nikon COOLPIX L105 - Setting Display Language, Date and Time

16
First Steps
Setting Display Language, Date and Time
A language-selection and date setting screen for the internal clock is displayed the
first time the camera is turned on.
1 Press the power switch to turn on the
camera.
The power-on lamp (green) lights for a moment and
the monitor turns on.
Remove the lens cap.
2 Use the multi selector to choose
the desired language and press
k.
For information on using the multi selector,
see “The Multi Selector” (A 11).
3 Choose Yes and press k.
If No is selected, the date and time are not set.
4 Press J or K to select your home time zone
(city name) (A 99) and press k.
Cancel
Date
Set time and date?
No
Yes
London
Casablanca
Back
D Daylight Saving Time
T
o use the camera in an area where daylight saving time is in effect,
press
H on the home time zone in Step 4 to set the daylight saving
time to on.
When the daylight saving time setting is selected, the W mark
appears at the top of the monitor. To release the daylight saving
time setting, press I.
London
Casablanca
Back