E2
Reference Section
Reference Section
Using Panorama Assist
Use a tripod for the best results.
* The icon for the last scene mode selected is displayed. The default setting is x (Scene auto
selector).
1 Use the multi selector to choose the direction
in which images will be joined and press the
k button.
• Panorama direction icons are displayed.
Select the direction in which images will be joined in
the completed panorama; right (I), left (J), up (K) or
down (L).
• The yellow panorama direction icon (I I) is displayed for the current direction and
the direction is fixed when k is pressed. The icon changes to the white fixed
direction I icon.
• If necessary, apply flash mode (A50), self-timer (A52), macro mode (A53) and
exposure compensation (A54) settings with this step.
• Press the k button again to choose a different direction.
2 Frame the first portion of the
panorama scene and take the first
picture.
• The camera focuses on the subject at the
center of the frame.
• One third of the image will be displayed as
translucent.
3 Take the next picture.
• Frame the next picture so that one third of the
frame overlaps the first image, and press the
shutter-release button.
• Repeat this process until the necessary
number of picture has been taken to
complete the scene.
On the shooting screen M A (shooting mode) button M x (second icon from the
top*) M K M U Panorama assist
To Next Page
Loading...
Need help?
General
