19
Preparation 3 Insert a Memory Card
Basic Steps for Shooting and Playback
Removing Memory Cards
Be sure that the power-on lamp and the monitor have
turned off and open the battery-chamber/memory
card slot cover.
Gently push the memory card into the camera (
1
) to
partially eject the card, and then remove the card. Pull
the memory card straight out of the camera (
2
); do
not pull it at an angle.
B High Temperature Caution
The camera, battery, and memory card may be hot immediately after using the camera. Observe
caution when removing the battery or memory card.
Internal Memory and Memory Cards
Camera data, including still images and movies, can be saved in either the
camera’s internal memory (approximately 39 MB) or on a memory card. To use the
camera’s internal memory for shooting or playback, first remove the memory card.
Approved Memory Cards
The following Secure Digital (SD) memory cards have been tested and approved
for use in this camera.
• Memory cards with an SD Speed Class rating of 6 or faster are recommended for
recording movies. Movie recording may stop unexpectedly when memory
cards with a lower Speed Class rating are used.
1
If the memory card is used with a card reader or similar device, make sure that the device
supports 2 GB cards.
2
SDHC compliant. If the memory card is used with a card reader or similar device,
be sure that the device is compliant with the SDHC standard.
3
SDXC compliant. If the memory card is used with a card reader or similar device,
be sure that the device is compliant with the SDXC.
• Contact the manufacturer for details on the above cards. We cannot guarantee
camera performance when using memory cards made by other manufacturers.
SD memory card SDHC memory card
2
SDXC memory card
3
SanDisk 2 GB
1
4 GB, 8 GB, 16 GB, 32 GB 64 GB
TOSHIBA 2 GB
1
4 GB, 8 GB, 16 GB, 32 GB 64 GB
Panasonic 2 GB
1
4 GB, 8 GB, 12 GB, 16 GB, 32 GB 48 GB, 64 GB
Lexar – 4 GB, 8 GB, 16 GB, 32 GB 64 GB, 128 GB
To Next Page
Loading...
Need help?
General
