▪ Flash/speed/aperture – This setting is for those who
want the camera to control the shutter speed, aperture,
and flash while still doing bracketing. If Custom setting
e5 > Auto bracketing set is set to AE & flash, the camera
will vary
the shutter speed, aperture, and flash level to expose the
bracketed images. If e5 is set to AE only, then the
camera will vary the shutter speed and aperture to get the
exposures.
▪ Flash/aperture – This setting is for those who want to
control the shutter speed for best action shots, while still
doing bracketing. The camera will control the aperture
and flash. If Custom setting e5 > Auto bracketing set is
set to AE & flash, the camera will vary the aperture and
flash level to expose the bracketed images. If e5 is set to
AE only, then the camera will only vary the aperture to
get the exposures.
▪ Flash only – This setting is for those who want to
control only the flash while doing bracketing. The
camera will only vary the flash level to get the bracketed
exposures. AE only obviously does not apply with this
setting.
My Recommendation: Since I am mostly a nature shooter, I
often leave my camera set to Flash/speed so that the camera
will control the shutter speed when I take a series of
bracketed images, but I’ll control the aperture. That way I can
choose how much depth of field I want to allow in my
images.
If I were shooting important action shots and wanted to
bracket, I’d select Flash/aperture so that the camera would
377