means that the Multi selector center button is disabled
when Not used is selected.
D300 (Only) Multi Selector Usage Clue
When you’re using the Multi Selector on the D300, even a
little sideways pressure on the center of the button causes it
to perform some other function than what was intended.
That’s why they added a Multi selector center button to the
D300S. You’ll have to use the Multi Selector carefully on
the D300. I’ve found that it seems more accurate when I
place the entire pad of my thumb completely over the
button and press down instead of inserting the very tip of
my thumb into the middle of the button. You try it and see
which way works better for you.
Playback Mode
Now, let’s look over how the Multi selector center button can
be used in Playback mode. Here are the screens and steps
used to configure it in Playback mode (see Figure 4-66):
1. Select f Controls from the Custom Setting Menu and
scroll to the right (see Figure 4-66, image 1).
2. Highlight Multi selector center button and scroll to the
right (see Figure 4-66, image 2).
3. Select Playback mode and scroll to the right (see
Figure 4-66, image 3).
388
To Next Page
Loading...
Need help?
General
Weight and Dimensions
