Introduction
2
Meaning of symbols used on the product
When appearing on the product, the symbols below indicate the need for caution at all times during use.
Consult the instruction manual and read the relevant instructions before attempting to use or adjust any part to which
the symbol has been affixed.
Caution! Biohazard
This symbol found on the stage indicates the following:0
• WARNING: Contact between sample and microscope may result in biohazard risks.
• To avoid biohazard contamination, avoid touching the contaminated portion with bare hands.
• Decontaminate the contaminated part according to the standard procedure specified for your
laboratory.
Caution for heat
This symbol found on the lamphouse of the ECLIPSE 80i indicates the following:
• The lamp and surrounding areas (including the lamphouse) become very hot during and
immediately after a period of illumination.
• Risk of burns. Do not touch the lamp or surrounding areas during or immediately after a
period of illumination.
• Make sure the lamp and surrounding areas have cooled sufficiently before attempting to
replace the lamp
To Next Page
Loading...
Need help?
General
