Nikon ECLIPSE 80i User Manual

Chapter 3 Part Names and Microscopy Procedures(With DIH-M Mounted)
3.3 Bright-Field Microscopy
41
3
3.3
Bright-Field Microscopy
1
Turn on power.
The C-Box and the power source for the
Epi-illumination do not need to be turned on. If
they are turned on, keep the shutter of the
Epi-illumination closed.
(The shutter is automatically kept closed when the
power switch is turned on. Do not touch the hand
switch. If the shutter is opened accidentally, press
the hand switch once again to close the shutter.)
2
Press the preset switch.
3
Move the ND8, ND32, and NCB11
filters into the optical path.
4
Pull out both optical path
switching levers and direct the
full optical path toward the
binocular section.
Press the
p
ower switch to
the "|" position.
Press the
p
reset switch.
ND8
ND32
NCB11
T
he full o
p
tical
path directed
toward the
binocular
section
Pull out both upper and
lower optical path
switchin
g
levers.

Nikon ECLIPSE 80i Specifications

General

Brand	Nikon
Model	ECLIPSE 80i
Category	Microscope
Language	English