Nikon eclipse fn1 User Manual

Chapter 3 Operation of Each Part
11 Polarizer Turret
35
3
6
Remove the 1/4 lambda plate and insert the upper part of the IR polarizer (the band pass filter
and the 1/4 lambda plate).
11.3
Contrast Adjustment
1
Insert the DIC slider into the single objective holder or into the sliding nosepiece to locate the
DIC prism of the condenser into the optical path.
2
Rotate the knurled ring on the right side of the polarizer turret upper side to change the
polarizer orientation and adjust the contrast.

Nikon eclipse fn1 Specifications

General

Brand	Nikon
Model	eclipse fn1
Category	Microscope
Language	English