132
Chapter
4
Multiple Flash Photography
Accessories for TTL Multiple Flash
TTL Remote Cord SC-17
Use coiled cord SC-17 for TTL Auto Flash operation when
using the SB-25 off the Nikon F90-Series/N90, F4-Series
(with DP-20 or DA-20), F-801/ N8008, F-801s/N8008s,
F-601/N6006, F-601
M/N6000, F-401x/N5005, F-501/
N2020, F-301/N2000, F-401/N4004, F-401s/N4004s, FA,
FE2 and FG cameras.
The SC-17 provides automatic sync speed setting and
the same ready-light viewfinder indication as if the flash unit
were directly mounted on the camera.
The SC-17 comes with two TTL multiple flash terminals
and one tripod socket. It is approx. 1.5m (4.9 ft.) long.
TTL Remote Cord SC-24
Use SC-24, for TTL Auto Flash operation when using the
SB-25 off a Nikon F4-Series camera fitted either with a 6x
High-Magnification Finder DW-21 or Waist-Level Finder
DW-20.
The SC-24 comes with two TTL multiple flash terminals
and one tripod socket. It is approx. 1.5m (4.9 ft.) long.
TTL Multi-Flash Adapter AS-10
Use Multi-Flash Adapter AS-10 when using more than three
units for TTL multiple flash operation.
The AS-10 comes with three multiple flash terminals and
one tripod socket. (Requires SC-18 or SC-19 for each flash
use.)
TTL Multi-Flash Sync Cord SC-18 and SC-19
To connect the flash unit for TTL multiple flash operation,
use Sync Cord SC-18 or SC-19.
The SC-18 is approx. 1.5m (4.9 ft.) long; the SC-19, 3m
(9.8 ft.) long.
Chapter 5
SC-17
SC-24
SC-18
AS-10
SC-19
Notes on Speedlight
SB-25_En 03.1.14 8:18 PM Page 132
To Next Page
Loading...
Need help?
General
