・Attach the button (#391) and the button (#392) to front cover unit.button (#391) and the button (#392) to front cover unit. and the button (#392) to front cover unit.button (#392) to front cover unit.
・Attach the snap ring (#387) from behind.Attach the snap ring (#387) from behind.
・Attach the spring (#201) and the button (#229).Attach the spring (#201) and the button (#229).
・Attach the E-ring (#722) from behind.Attach the E-ring (#722) from behind.
Front cover unit (#B24)
・Mount the front cover unit.Mount the front cover unit.
(When mounted, the GND plate (#140) must not be placed on the front cover.) (When mounted, the GND plate (#140) must not be placed on the front cover.)
OK
NG
Front cover unit
E-ring (#722)
Spring (#201)
Button (#229)
Snap ring (#387)
Button (#391)
Button (#392)
Front cover unit (#B24)
GND plate (#140)
Front cover
VBA23001-R.3762.A
- A74 ･ D90 -
A71
Changed page △×１
△（Revision）
October. 2. 2008
To Next Page
Loading...
Need help?
General
