VBA23001-R.3762.A
- A17 ･ D90 -
・Insert the three springs (#170).Insert the three springs (#170).
・Mount the AF CCD unit (#B2163).Mount the AF CCD unit (#B2163).
・Bend the FPC inward.FPC inward.
・Turn the three screws (#173) lightly all the way with HEX KEY WRENCH (screws (#173) lightly all the way with HEX KEY WRENCH (with HEX KEY WRENCH (HEX KEY WRENCH (
�
1.5mm) until they stop, then give them
two turns counterclockwise.
(#B2163)
Spring (#170)
×
3
Screw (#173)
×
3
AF CCD unit
Grease: CFD-409Z
Dipping:
×3
To Next Page
Loading...
Need help?
General
