36
Disposal
The environment - part of the solution
At Nilan A/S we recognize our responsibility in minimizing the environmental impact of our products. We consider the impact on the
environment in all aspects of production, operation and subsequent disposal. We recognize our responsibility in minimizing consump-
tion of resources. We work continuously to improve our products and the production process in order to limit our impact on the envi-
ronment.
Ventilation unit
Nilan units consist mainly of recyclable materials. They must, therefore, not be mixed with household waste, but
must be delivered to your local recycling center for disposal.
The only tools you will need is a Torx 25 screwdriver and, perhaps, a pair of diagonal pli-
ers for cutting wires.
1. The orange bypass motor is removed and handed in by electronic waste
2. Circuit board and electronics are pulled out and handed in by electronic waste
3. Fans are dismantled and handed in by electronic waste
4. The hot water tank is handed over for metal waste
5. The water trap hose is delivered to soft plastic waste
6. The heat pump:
ATTENTION
When disposing of units with heat pumps, it is important to contact the
local authorities for information about the correct disposal procedure.
The heat pump contains the refigerant R134a/R410a, which is harmful to
the environment if not handled correctly.
To Next Page
Loading...
Need help?
General
