Data Network Terminal Single-port and Multiport Operating Instructions
114 (128) © Nokia Corporation DN01145897
Nokia Proprietary and Confidential Issue2-0en
• You can clear all statistic parameters.
9.5 User privileges (10)
This menu allows you to give a new password (see Figure 72). The length of the
password can be 1 to 7 characters.
The default password is: DNT2Mi.
The menu allows also to restrict user rights by changing the settings of the
parameters. The suboptions of the Setting parameters (10,4) menu allow you to:
• change the password timeout and display the current timeout value
• display the current status of protection and change the status
• change the password.
It is also possible to see whether the user is allowed or disallowed to configure the
device or to launch tests using the front panel keys. The options of this submenu
(10,5) give you possibility to:
• see if configuring or test launching (activation) is allowed or not
• allow or disallow users to configure or test DNT2Mi.
Since last reset:
TT: 0 d 0 h 26 min 1 s
UAT (Rx):
ES (Rx):
SES (Rx):
BBE (Rx):
UAT (Tx):
ES (Tx):
SES (Tx):
xx
xx
xx
xx
xx
xx
xx
To Next Page
Loading...
Need help?
General
