Commissioning DNT2Mi
DN01145897 © Nokia Corporation 47 (128)
Issue 2-0 en Nokia Proprietary and Confidential
Note
6.10 Factory values
Recalling the default values does not affect the following settings that are
considered as factory settings. When the factory settings are recalled, the values
in this section and in Section 6.9 become effective.
Recalling of factory settings can take up to 60 seconds.
G.704 TS map Equal to line
Unused time slots Filled with FF
National bits Sa4 to Sa8 1
BER alarm limit 1E-3
BER alarm severity B-level
Table 11. Port parameters, G.704/2M (Continued)
Table 12. Factory values
Q1 address 2
Q1 rate 4800 bit/s
To Next Page
Loading...
Need help?
General
