Maintaining DNT2Mi
DN01145897 © Nokia Corporation 49 (128)
Issue 2-0 en Nokia Proprietary and Confidential
7 Maintaining DNT2Mi
This chapter describes what general information and statistics you can get on the
equipment to be monitored. It also deals with possible alarms and faults.
You can access all this information using front panel or Q1 menus. The menus are
described in detail in Chapters 8 and 9.
7.1 Getting general information
The front panel menu Monitor Info or the Identifications menu, branch 4 on the
Q1 main menu, gives the name and type of the unit to be monitored, the codes and
versions of HW units and programs to be used.
Figure 26. Example of general information
In this menu, only the name of the supervised unit is changeable. To change the
name, select Modify (Q1 menu option 4,7,2,1). Note that the maximum length of
the name is 15 characters.
Identifications
Equipment name:
DNT2Mi
Equipment type:
DNT2Mi mp (T65680)
HW:
Main E65671.01 A
Mux E65633.01 A
SW:
S65672.01 A0
Port 1:
V.35 (DS 62604)
Port 2:
X.21 (DS 62605)
Port 3:
V.11 (DS 62603)
To Next Page
Loading...
Need help?
General
