Make calls
69
If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise,
the device selects the first available number of the following:
Mobile, Mobile (home), Mobile (work), Telephone, Tel.
(home), and Tel. (work).
Answer or decline a call
To answer a call, press .
To mute the ringing tone when a call comes in, select Silence.
If you do not want to answer a call, press . If you have
activated the Call forward > If busy function to forward
calls, declining an incoming call also forwards the call. See
"Call forwarding," p. 95.
When you decline an incoming call, you can send a text
message to the caller informing why you cannot answer
the call. Select Options > Send text message. You can
edit the text before sending it. To set up this option and
write a standard text message, see "Call settings," p. 90.
Call waiting
You can answer a call while you have another call in progress,
if you have activated Call waiting in Tools > Settings >
Call > Call waiting. Call waiting is a network service.
Tip! To change the device tones for different
environments and events, for example, when you want
your device to be silent, see "Profiles—set tones," p. 85.
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap. To connect an
incoming call or a call on hold with an active call and to
disconnect yourself from the calls, select Options > Transfer.
To end the active call, press . The first call remains active.
To end both calls, select Options > End all calls.
Options during a voice call
Many of the options that you can use during a voice call
are network services. Select Options > Mute or Unmute,
Answer, Decline, Swap, Hold or Unhold, Activate handset,
Activate loudsp., or Activate handsfree (if a compatible
headset with Bluetooth connectivity is attached), End active
call or End all calls, New call, Conference, Transfer, and
Open active standby. Select from the following:
Replace—to end an active call and replace it by answering
the waiting call
Send MMS (in UMTS networks only)—to send an image or
a video in a multimedia message to the other participant
of the call. You can edit the message and change the
recipient before sending. Press to send the file to a
compatible device (network service).
Send touch tones—to send touch tone strings, for example,
a password. Enter the touch tone string or search for it in
Contacts. To enter a wait character (w) or a pause character
(p), press repeatedly. Select OK to send the tone.
N75.EN_ESv1_BIL_9252942.book Page 69 Monday, April 2, 2007 3:31 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
