Tip: When you have only one active voice call, to
put the call on hold, press the call key. To activate
the call, press the call key again.
During an active call, to route the sound from the
handset to the loudspeaker, select Options >
Activate loudspeaker. If you have attached a
compatible headset with Bluetooth connectivity, to
route the sound to the headset, select Options >
Activate handsfree. To switch back to the handset,
select Options > Activate handset.
To end an active call and replace it by answering the
waiting call, select Options > Replace.
If you have several calls active, to end them all, select
Options > End all calls.
Many of the options that you can use during a voice call
are network services.
Voice and video mailboxes
To call your voice or video mailbox (network services,
video mailbox available only in the UMTS network),
press and hold 1 in the standby mode, and select Voice
mailbox or Video mailbox.
To change the phone number of your voice or video
mailbox, press
, and select Tools > Utilities > Call
mailbox, a mailbox, and Options > Change
number. Enter the number (obtained from your
network service provider), and select OK.
Answer or decline a call
To answer the call, press the call key, or open the slide.
To mute the ringing tone of an incoming call, select
Silence.
If you do not want to answer a call, press the end key.
If you activate the Call forwarding > Voice calls >
If busy function in phone settings to forward calls,
declining an incoming call also forwards the call.
When you select Silence to mute the ringing tone of
an incoming call, you can send a text message without
rejecting the call, informing the caller that you cannot
answer the call. Select Options > Send text
message. To set up this option and write a standard
text message, select Tools > Settings > Phone >
Call > Reject call with SMS.
Make a conference call
1. Make a call to the first participant.
2. To make a call to another participant, select
Options > New call. The first call is automatically
put on hold.
3. When the new call is answered, to join the first
participant in the conference call, select Options >
Conference.
111
Make calls
To Next Page
Loading...
Need help?
General
