1 — Capture mode indicator
2 — Active toolbar. The toolbar is not displayed during
image capture.
See "Active toolbar", p. 61.
3 — Battery charge level indicator
4 — Image resolution indicator, which indicates
whether the quality of the image is Print 5M - Large,
Print 3M - Medium, Print 2M - Medium, E-mail 0.8M
- Med., or MMS 0.3M - Small. The quality of a digitally
zoomed picture is lower than that of an unzoomed
picture.
5 — Image counter, which displays the estimated
number of images you can capture using the current
image quality setting and memory in use. The counter
is not displayed during image capture.
6 — The device memory (
) and mass memory ( )
indicators, which show where images are saved
Active toolbar
The active toolbar provides you with shortcuts to
different items and settings before and after taking a
picture or recording a video. Scroll to items, and select
them by pressing the scroll key. You can also define
when the active toolbar is visible on the display.
The settings in the active toolbar return to the default
settings after you close the camera.
To view the active toolbar before and after taking a
picture or recording a video, select Options > Show
icons. To view the active toolbar only when you need
it, select Options > Hide icons. Only the capture
mode and battery level indicators are shown on the
display. To activate the active toolbar, press the scroll
key. The toolbar is visible for 5 seconds.
Before taking a picture or recording a video, in the
active toolbar, select from the following:
to switch between the video and image modes
to select the scene
to select the flash mode (images only)
to activate the self-timer (images only). See "You in
the picture—self-timer", p. 64.
to activate the sequence mode (images only). See
"Take pictures in a sequence", p. 64.
to select a colour effect
to show or hide the viewfinder grid (images only)
61
Camera
To Next Page
Loading...
Need help?
General
