— Copy content from another device.
— Copy content to another device.
2 Select the device you want to connect to, and pair the devices. Bluetooth needs to
be activated.
3 If the other device requires a passcode, enter the passcode. The passcode, which
you can define yourself, must be entered in both devices. The passcode in some
devices is fixed. For details, see the user guide of the device.
The passcode is valid only for the current connection.
4 Select the content and OK.
Tip: If you save the details, it is easier to later exchange the same content with the same
device.
Protect your device
Set your device to lock automatically
Want to protect your device against unauthorised use? Define a lock code, and set your
device to lock itself automatically when you're not using it.
1 Select Menu > Settings and Phone > Phone management > Security
settings > Phone and SIM card.
2 Select Lock code, and enter a lock code. A minimum of 5 characters is required, and
numbers, symbols, and upper and lower case letters can be used.
Keep the lock code secret and in a safe place separate from your device. If you forget
the lock code and your device is locked, your device will require service. Additional
charges may apply, and all the personal data on your device may be deleted. For
more information, contact a Nokia Care point or your device dealer.
3 Select Phone autolock period, and define the length of time after which the device
is locked automatically.
Lock your device manually
Press and hold the power key
, and select Lock phone.
Enter the lock code.
Unlock your device
Press the power key
or the menu key, and select Unlock.
Enter the lock code.
Tip: To switch between the numeric and alphanumeric keypad, press and hold #.
108 Device management
To Next Page
Loading...
Need help?
General
