•
•
•
Part Type Part
Number
Legacy
Part
Number
Description Supported
Systems
ACC001449 N/A Power Cord Gray 250V 10A 1830MM C14 TO
C15 EUR + CCC
SN4410, SN4600/
SN4600C,SN4700
ACC001550 N/A Power Cord Black 110V 15A 1830MM C14
TO C15 UL
SN4410, SN4600/
SN4600C, SN4700
Thermal Threshold Definitions
Three thermal threshold definitions are measured by the Spectrum®-3 ASICs, and impact the overall
switch system operation state as follows:
Warning– 105°C: On managed systems only: When the ASIC device crosses the 100°C
threshold, a Warning Threshold message will be issued by the management software,
indicating to system administration that the ASIC has crossed the Warning threshold. Note
that this temperature threshold does not require nor lead to any action by hardware (such as
switch shutdown).
Critical– 120°C: When the ASIC device crosses this temperature, the switch firmware will
automatically shut down the device.
Emergency– 130°C: In case the firmware fails to shut down the ASIC device upon crossing its
Critical threshold, the device will auto-shutdown upon crossing the Emergency (130°C)
threshold.
For thermal threshold definitions in Cumulus Linux, seeConfiguring Net-SNMPEvent Notification
Trapsin theCumulus Networks Help Center.
Interface Specifications
Small Form Factors Specifications
NVIDIA switch systemscome in a flexible range of form factors - SFP/QSFP, SFP28/QSFP28, SFP56/
QSFP56 and SFP-DD/QSFP-DD.
All form factors specification documents are available on the Storage Networking Industry
Association (SNIA) Website.
USB Standard Specifications
For the specification documents of all available USB types, please refer to the document library in
the USB Organization Website.
To Next Page
Loading...
Need help?
General
