OPERATOR PANELS > 30
Memory menu
This menu determines how printer memory is used.
System adjustment menu
This menu provides fine adjustment of image position on the printed
page in steps of 0.25mm.
Maintenance menu
This menu provides access to various printer maintenance functions.
HUB LINK SETTING AUTO NEGOTIATE Only when NIC is installed
MEMORY MENU
Item Default Remarks
RECEIVE BUFF SIZE AUTO
RSRC SAV OFF
SYSTEM ADJUSTMENT MENU
Item Default Remarks
X ADJUST 0.00 mm
Y ADJUST 0.00 mm
PCL MANUAL ID# 2
PCL TRAY1 ID# 1
PCL TRAY2 ID# 5 Only when Tray 2 is installed
PCL MP ID# 6 Only when MPF is installed
PLACE PAGE CENTER
MAINTENANCE MENU
Item Default Remarks
EEPROM RESET
DRUM COUNT RESET
POWER SAVE ENABLE
SETTINGS 0
DARKNESS 0
NETWORK MENU
Item Default Remarks
To Next Page
Loading...
Need help?
General
