PAPER RECOMMENDATIONS > 34
TRANSPARENCIES AND ADHESIVE LABELS
The manufacturer of this printer recommends the following guidelines
when selecting transparencies and adhesive labels for use in your
printer:
l Always use manual feed.
l Always use rear output.
l Media must be designed for use in laser printers or
photocopiers and must be able to withstand 200°C for 0.1 sec.
l Do not use media designed for use in colour laser printers and
photocopiers
l Labels should cover entire carrier sheet.
l Carrier sheet or adhesive must not
must not must not
must not be exposed to any part of
the printer.
To Next Page
Loading...
Need help?
General
