PAPER RECOMMENDATIONS > 40
3. Start the Status Monitor
Status MonitorStatus Monitor
Status Monitor.
4. Click on [Printer Setup] tab - [Printer Menu] button - [Paper tab]
- [Manual Feed] button. Adjust the media type to Transparency
and the paper size to the size of the transparency being used.
5. Click on the [Apply] button, [Close] button then [OK] button to
set the printer for transparencies.
B4350, B4350N, B4350NPS
Using the control panel on your printer, you can choose:
l which paper to use
l the size of the paper you wish to use
l the weight of the paper (thickness)
l the type of paper
NOTE
Remember to reset the printer for normal paper after printing
transparencies.
NOTE
l If the settings in the printer differ from those selected on your
computer, the printer will not print and the LCD will display an error
message.
l The following printer settings are given as a guide only. Some
software applications require the paper feed, size and media
settings to be selected from within the application (page setup).
l Although media properties can be set in the printer driver for
particular jobs, it is recommended that when filling a tray with
media you manually set the printer to match the media as described
here.
To Next Page
Loading...
Need help?
General
