EasyManuals Logo
Home>Oki>Printer>B431dn

Oki B431dn User Manual

Oki B431dn
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
Paper recommendations > 34
> Envelopes should be loaded flap down, face up with the top edge to the left and
short edge into the printer.
> Load Transparencies face up and top edge into the printer.
> For heavyweight paper or cardstock open the rear stacker to collect the printed
output. This will give the paper a nearly straight path through the machine,
avoiding paper jams and damage to the paper.
3. B431: If required, set the media size and orientation in the media menu using the
control panel, then issue the print command.
B411: If required, set the media size and orientation in the Configuration tool, then
issue the print command.
P
APER
FEED
,
SIZE
AND
MEDIA
SETTING
The process used to fuse (fix) the printed image to the paper involves a mixture of pressure
and heat. Too much heat will cause lightweight paper to crease or curl and corrugations in
transparencies. Too little heat will cause the image not to fuse fully into heavyweight paper.
B411
D
, B411
DN
You can change the media type as follows:
1. Start the Configuration tool.
2. Expand the User Menu to list the options.
3. Expand the Media Menu to list the options.
4. Click on the paper tray being used. Adjust the media type to the required setting
and, if necessary, the paper size to the size of the paper being used.
5. Click Save to Device icon, to save the new settings.
6. Click OK.
NOTE
Do not select Duplex printing on envelopes.
CAUTION!
Damage to the printer may occur if the incorrect paper setting is
used when printing on a different media.
NOTE
> You can also set the media type in your printer driver. However, the
printer driver settings will override the settings on the control panel or
Configuration Tool.
> Remember to reset the printer for normal paper after printing on a
different media.
NOTE
Although media properties can be set in the printer driver for particular jobs,
when filling a tray with media it is recommended that you manually set the
printer to match the media as described here.

Table of Contents

Other manuals for Oki B431dn

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki B431dn and is the answer not in the manual?

Oki B431dn Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLED
Time to first page (black, normal)4.5 s
Print speed (black, normal quality, A4/US Letter)38 ppm
Processor model405
Processor familyPowerPC
Maximum internal memory320 MB
Sound power level (standby)30 dB
Sound pressure level (printing)54 dB
Total input capacity250 sheets
Total output capacity150 sheets
Maximum input capacity880 sheets
Total number of input trays1
Maximum number of input trays2
Multi-Purpose tray input capacity100 sheets
Printing colorsBlack
Maximum duty cycle80000 pages per month
Recommended duty cycle5000 - 5000 pages per month
Page description languagesEpson FX, IBM ProPrinter, PCL 5e, PCL 6, PostScript 3
Envelopes sizes7 3/4, 9, 10, C5, C6, DL
Maximum print size216 x 356 mm
Paper tray media typesEnvelopes, Plain paper
Paper tray media weight60 - 120 g/m²
Non-ISO print media sizesExecutive (184 x 267mm), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)A4, A5, A6
JIS B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 163 g/m²
Cabling technology10/100Base-T(X)
Ethernet LAN data rates10, 100 Mbit/s
Mobile printing technologiesNot supported
Supported network protocols (IPv4)ARP, TCP, UDP, LPR, FTP, Telnet, HTTP, BOOTP, DHCP, AutoIP, DNS, DDNS, uPnP, Bonjour, WINS, SSL/TLS, SMTP, SNTP, WSD-Print, LLTD, SLP, NetBIOS, JetDirect, IPX, R-Printer, N-Printer, NCP, SPX, IPX, SAP, RIP, ELAP, AARP, DDP, AEP, NBP, ZIP, RTMP, ATP, PAP, SMB, NetBIOS
Networking featuresFast Ethernet
Compatible operating systemsWindows 2000\\r Windows XP Home\\r Windows XP Professional\\r Windows Server 2003\\r Windows Server 2008\\r Windows Vista\\r Windows 7\\r Linux\\r Mac OS X 10.3.9+
Compliance industry standardsIEEE 802.3, IEEE 802.3u
AC input voltage230 V
AC input frequency50 - 60 Hz
Power consumption (standby)70 W
Power consumption (printing)550 W
Power consumption (PowerSave)8 W
Sustainability certificatesENERGY STAR
Storage temperature (T-T)-10 - 43 °C
Operating temperature (T-T)10 - 32 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Standard interfacesParallel, USB 2.0
DisplayLCD
Product colorWhite
Weight and Dimensions IconWeight and Dimensions
Depth364 mm
Width387 mm
Height244.5 mm

Related product manuals