Specifications > 78
N
OTES
/
SYMBOLS
/
TERMS
Notes:
1. When an optional second paper tray is used, the original tray is referred to as Tray 1
and the optional tray as Tray 2.
2. It is possible to use custom paper sizes with the PS emulation driver.
3. Tray 1 can accommodate paper with width of 100 to 216mm and length of 148 to
356mm.
4. Tray 2 can accommodate paper with width of 148 to 216mm and length of 210 to
356mm.
5. When printing using Auto Duplex, paper will not be ejected face up.
6. The printing speed is reduced when you set the paper size of A5, A6, Postcards,
Envelopes as Medium heavy, Heavy or Ultra heavy.
7. Change the ejection mode to face down if the paper is curled up.
8. Change the ejection mode to face up if the paper curl is large.
9. When changing media settings, allow 15 seconds for the printer to adjust to the new
setting.
Envelopes Com-9
Com-10
DL
C5
C6
Monarch
Custom
W: 86 – 216
L: 140 – 356
-XXXXXXXX
Labels A4
Letter
-XXXXXXXX
Transpa-
rencies
A4
Letter
-XXXXXXXX
SYMBOL/
TERM
MEANING
T1 Paper Tray 1
T2 Paper Tray 2 (optional)
MPT Multi Purpose Tray (B431)
MF Manual Feed Tray (B411)
FU Face Up printing from the rear of the printer
FD Face Down printing from the top of the printer
W, L W i d t h , L e n g t h i n m m
Duplex Printing
Auto Manual
Paper type Size Weight T1 T2 MPT MF T1 T2 MPT MF