Introduction> 10
R
EAR
VIEW
This view shows the connection panel and the rear output
stacker.
When the rear paper stacker is folded down, paper exits through
the rear of the printer and is stacked face up. The rear stacker is
mainly used for heavy print media. When used in conjunction
with the Multi Purpose Tray, the paper path through the printer
is essentially straight. This avoids bending the paper around
curves in the paper path inside the printer and enables feeding of
up to 203g/m² media.
9. Output stacker, face down.
Standard printed copy delivery
point. Holds up to 150 sheets at
80g/m².
10. Rear Stacker, face up.
Can hold up to 10 sheets of 80g/
m² standard paper and can
handle paper stocks of up to
203g/m².
11. AC Power Socket.
12. USB interface and LAN Port
USB cable must be of length 2m
maximum for reliable Status
Monitor operation.
LAN
TEST
9
10
12
11
To Next Page
Loading...
Need help?
General
