Using the printer software> 96
USB
MENU
This menu controls the operation of the printer’s USB data
interface.
JAM RECOVERY ON
OFF
Specifies whether the printer should
perform jam recovery after a paper
jam has occurred. If ON, the printer
will attempt to print again any pages
lost due to a paper jam once the jam
has been cleared.
ERROR REPORT ON
OFF
Specifies whether to print an error
report when an internal error occurs.
LANGUAGE English,
German,
French, Italian,
Spanish,
Swedish,
Norwegian,
Finnish, Danish,
Dutch, Turkish,
Portuguese,
Polish, Russian,
Greek
Sets the language used for the
Status Monitor and printed reports.
SYSTEM CONFIGURATION MENU
ITEMS SETTINGS EXPLANATION
USB MENU
ITEM SETTINGS EXPLANATION
SOFTWARE
RESET
ENABLED /
DISABLED
Enables or disables the SOFT RESET
command. (Only available on
Windows 98 and Windows Me.)
MAXIMUM
SPEED
12MBPS
480MBPS
Specifies the maximum transfer
speed.
SERIAL NUMBER ENABLED /
DISABLED
Specifies the USB serial number to
differentiate between USB devices
connected to the PC. If ENABLED,
the serial number is transmitted. If
DISABLED, the serial number is not
transmitted.
To Next Page
Loading...
Need help?
General
