CONFIRMING JOB STATUS
- 101 -
ï‚¢ Confirming the information of a
skipped job
Copy jobs may not be performed because the specified paper
or staples have run out, etc. These will be suspended and the
next job will be performed (Job Skip function). Check on the
touch panel how you can recover the suspended jobs.
1
Select the skipped job in the print job list,
and press [RECOVERY INFORMATION].
2
Resolve the cause of the skip following the
instructions on the screen.
Note
• If multiple causes exist, the second cause is displayed
after you resolve the first one. Resolve all causes
accordingly.
Confirming copy job history
You can confirm the history of copy jobs performed on the
touch panel.
1
Press [JOB STATUS] on the touch panel.
2
Press the [LOG] tab.
3
Press [PRINT].
The print log list appears. Copy jobs appear on the print
log list as well as print jobs.
On the print log list, you can confirm the icon of the job
type, the name of the user who performed the job, the
date and time the job was printed, the paper size and the
number of pages or copy sets. 5 jobs appear on 1 page of
the print log list. When you press or on the touch
panel, the menu will be changed to the previous one or
the next one, so that you can view up to 120 jobs.
When you finish the confirmation, press [CLOSE] so that
the menu returns to the one in step 3, and then press
[CLOSE]. The menu returns to the one shown before you
pressed [JOB STATUS].
To Next Page
Loading...
Need help?
General
