Network configuration > 16
NetWare Tab
This is where you can configure NetWare related items.
ITEM EXPLANATION
Use NetWare
Protocol
Set NetWare protocol as enabled/disabled.
Use IPX
Protocol / Use
TCP/IP
Protocol
Set protocol to use.
Print Server
Name
Set Print Server name.
Frame Type Set primary NetWare frame type.
Operation
Mode
Set NetWare mode.
Check box
beside Bindery
Setup
Check if you want to use the Bindery mode and Bindery
Setup button becomes available. If it is unchecked, the
button is greyed out.
Bindery Setup Configure items related to
Bindery mode.
In this dialogue box, the
following items can be
configured:
Password. Set password for Print Server.
Job Polling Time. Set print job polling interval in
seconds.
NDS Setup Set NDS tree and context
where Print Server was
created.
To Next Page
Need help?
General
