Network configuration > 6
N
ETWORK
CONFIGURATION
I
NTRODUCTION
Your printer incorporates a fast 100BASE-TX/10BASE-T network
interface. This User’s Guide explains the functionality of the built
in network interface. Access for interconnection and producing
self-diagnostic test and configuration printouts is provided via an
interface panel at the rear of the printer.
This network interface supports IEEE802.2, IEEE802.3, Ethernet-
II and SNAP*, and can detect those frame types automatically.
Also, the interface supports major protocols such as TCP/IP, IPX/
SPX (NetWare) and NetBEUI.*
This Guide details the network interface specification and several
software utilities.*
You should set the emulation in the Printer Menu settings to Auto
or PS before printing the self-diagnostic test and settings.
*NOTE:
Not all utilities, features or protocols are supported by
every operating system. Please check with your User’s
Guide and support website for latest information.
To Next Page
Loading...
Need help?
General
