Oki Hard Disk Drive User Manual

Network configuration > 7
S PECIFICATION
S ELF - DIAGNOSTIC TEST
With the printer power switched on, press the push-button
located on the network interface panel (at the rear of the printer)
for more than three seconds and release. The self-diagnostic test
results and configuration settings are printed.
On the first page of the Network Information that is printed out,
under the heading “General Information” the MAC Address is
given. For example:
MAC Address 00808784E3F1
The Ethernet address is therefore: 00:80:87:84:E3:F1
Frame Types IEEE 802.2
IEEE 802.3
Ethernet-II, SNAP, AUTO
Network Interface 100BASE-TX
10BASE-T
Network Protocols TCP/IP V4, V6
IEEE 802.1x
Network layer: ARP, RARP, IP, ICMP
Session layer: TCP, UDP
Application layer:LPR, FTP, TELNET, HTTP, IPP,
BOOTP, DHCP, SNMP, DNS, SMTP, POP3, SLP, Bonjour
IPX/SPX (NetWare)
Remote printer mode (up to eight file servers and 32
queues)
Print server mode over IPX/SPX (up to eight print
servers)
Encrypted password supported in print server mode
EtherTalk
NetBEUI
NetBIOS, WINS
Functions Self-diagnostic test printing
Banner supported
Monitoring and configuration by Web browser
Printer status notification by E-Mail
NOTE:
Not all utilities, features or protocols are supported by
every operating system. Please check with your User’s
Guide and support website for latest information.

Oki Hard Disk Drive Specifications

General

Brand	Oki
Model	Hard Disk Drive
Category	Printer
Language	English