Network configuration > 39
2. Insert the CD-ROM into the CD-ROM drive. The Setup
Utility starts automatically. If it does not start, double-
click setup.exe on the CD-ROM.
3. Select Optional Utilities.
4. Select Install Direct Network Printing Utility (LPR).
5. Follow the on-screen instructions.
6. Click Next when the Welcome screen is displayed.
7. Verify Destination Folder and Spool Folder and click
Next.
8. Check Register in Startup if you want automatic startup
as Windows boots up. Check Launch as minimized if
you want to startup in the Icon state and click Next.
9. Verify the program folder name and click Next. The
installation starts.
10. When the installation ends, the Setup complete screen is
displayed. Check Yes, I want to launch Oki LPR Utility
now and click Finish. Check Yes, I want to view the
ReadMe File if you want to read Readme. The OkiLPR
utility will start.
11. You may be asked whether it is OK to change write
permissions for the spool directory. Click Yes to allow the
utility to be correctly installed.
12. Select Add Printer on the Remote Print menu.
13. Click Discover… to search for the IP address of a suitable
printer on your network.
14. Highlight the printer you will use and click OK.
15. If your printer is not discovered, click Cancel and you can
type the IP address directly at IP Address:.
16. Enter an IP address at IP Address and click OK. A printer
is added to the main window.
Refer to the On-line Help for information on how to use the utility.
To Next Page
Loading...
Need help?
General
