UNIX > 74
> euc must be used for the printing a text file of the EUC
Kanji code
> jis and euc function only as PostScript printers.
> You can not send data to the root directory.
1. Log in to the network interface card.
When printing with ftp, use any values for name and
password. However, if the user name is root, the password
set under TELNET or the utility is required. See the
appropriate section for details.
Example: Logging in with host name myprn (or IP address
192.168.20.127).
# ftp myprn (or ftp 192.168.20.127)
Connected to myprn
220 EthernetBoard 8100e Ver 01.50 FTP Server
Name (myprn:<none>) : root
331 Password required.
Password:<CR>
230 User Logged in
ftp>
The network card logical directory structure is hierarchical.
Move to the logical directory; it is not possible to output
print data to the root directory.
2. Move to the preferable logical directory using the cd
command.
Example: moving to the lp directory and confirming the
current directory.
ftp> cd /lp
250 Command OK.
ftp> pwd
LOGICAL DIRECTORY PRINTER FUNCTION
lp For direct output
sjis For Shift JIS Kanji converted output
euc For EUC Kanji converted output
To Next Page
Loading...
Need help?
General
