Oki MB760dnfax User Manual

MANAGING COUNTERS (COUNTER MENU)
- 297 -
2
1
3
4
5
6
7
5
Press [NEW CODE].
The on-screen keyboard is displayed.
For details of the on-screen keyboard, see the following
page:
 P.300 "On-screen keyboard"
6
Enter the new department code and press
[OK].
You will be returned to the EDIT DEPARTMENT CODE
screen.
Memo
• You can enter a department code of up to 63
characters. Characters you can enter are as follows:
- Alphanumerics, “-”, “_”, and “.”
• If you want to clear the code to retype it, press [Clear]
on the on-screen keyboard or the [CLEAR] button on
the control panel.
7
Press [OK].
The QUOTA screen is displayed.
8
Set the quota of this department code as
required, and press [OK].
For the description of each item, see step 7 in the
following operation:
 P.295 "Registering a new department code"
Deleting department codes
You can delete an existing department code.
1
On the DEPT. MANAGEMENT menu screen,
press [DEPARTMENT REGISTRATION].
The DEPARTMENT CODE screen is displayed.
Memo
• For instructions on how to display the DEPT.
MANAGEMENT menu screen, see the following page:
 P.293 "Logging on as administrator"
2
Press the department button that you want
to delete, and then [DELETE].
The message “Delete OK?” is displayed on the
CONFIRMATION screen.
Note
• If the touch panel does not display the desired
department code, press to display the next page.

Oki MB760dnfax Specifications

General

Brand	Oki
Model	MB760dnfax
Category	All in One Printer
Language	English