Oki MICROLINE MX Series Quick Setup Guide

21
Cabinet Model
Connect The Interface And Power Cables
Cabinet Model
Interface Connections
Figure 13. Routing the I/O Cable and AC Power Cable
1. Make sure the printer power switch is set to O (Off).
2. Open rear cabinet door and locate the cable routing notch in
the lower left corner of the back of the cabinet.
Cable-Routing
Notches
I/O Connectors
Power
Switch
AC Power
Connection
I/O Cover
Upper and
Lower
Standoffs
Connect The Interface And Power Cables
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es

Oki MICROLINE MX Series Specifications

General

Brand	Oki
Model	MICROLINE MX Series
Category	Printer
Language	English