CONTENTS
Correct assembly and adjustments are critical for the microscope to exhibit its full performance. If you are going to assemble
the microscope yourself, please read section 9, “ASSEMBLY” (pages 39 to 44) carefully.
IMPORTANT -- Be sure to read this section for safe use of the equipment. --
1-5
1 MODULE NOMENCLATURE
6
2 CONTROLS
7- 11
3 FLOW OF BRIGHTFIELD OBSERVATION
12,13
4 USING THE CONTROLS
14-32
4-2 Base
.............................................................................................................................................................................................................
20,21
4-4 Stage (for the IX-SVL2)
.......................................................................................................................................................
25,26
4-5 Observation Tube
....................................................................................................................................................................
27-29
4-6 Condenser
..........................................................................................................................................................................................
30,31
4-7 Immersion Objectives
.................................................................................................................................................................
32
4-3 Stage (for the BX Series)
..............................................................................................................................................
22-24
4-1 Touch Panel Controller
.......................................................................................................................................................
14-19
BX63
4-8 Objectives with Correction Collar
..............................................................................................................................
32
2 Moving the Specimen
2 Adjusting the Diopter
1 Placing the Specimen
1 Adjusting the Interpupillary Distance
1 Centering the Condenser 2 Compatibility of Objectives and
Condensers
1
Using the Filters
3 Setting the Grounding
5 Using the Light Shielding Sheet
3 Using the Eye Shades 4 Mounting the Eyepiece Micrometer
Disk
6 Adjusting the Tilt
4 Adjusting the X-Axis/Y-Axis Knob
Rotation Tension
5 Selecting the Light Path of the
Trinocular Tube
2 Using the Auxiliary Slide Holder
2 Starting the System
1
Placing the Slide-Glass Specimen
1 Basic Operations of Touch Panel
Controller
3 Placing the
35 mm Dish Specimen
3 System Setting
4 Adjusting the X/Y-Axis Knob Rotation
Tension
4 Selecting the Mode
1 Using Immersion Objectives
To Next Page
Loading...
Need help?
General
