5
94
EN
PC connection/disconnection
PC connection/disconnection
Disconnecting the voice recorder from a PC
Windows
1
Click [ ] on the task bar in the
lower right hand corner of the
screen and click [
Eject DIGITAL
VOICE RECORDER
].
• The letter used to identify the drive
will vary according to your PC.
• When the window indicating it is safe
to remove hardware appears, close the
window.
2
Check that the LED indicator light
of the voice recorder has stopped
blinking and then disconnect the
USB cable.
Macintosh
1
Drag-and-drop the removable
disk icon for the voice recorder
shown on the desktop to the
trash can icon.
2
Check that the LED indicator light
of the voice recorder has stopped
blinking and then disconnect the
USB cable.
TIP
• You can disconnect the USB cable and use the voice recorder before the battery is fully
charged.
NOTE
• To prevent the risk of data damage, never disconnect the voice recorder from the USB
port while the LED indicator light is flashing.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
