44
3
Basic shooting functions
Adjusting picture brightness (exposure
compensation)
This function allows you to make fine changes to the exposure setting. You
can adjust the exposure in the range of ±2.0 EV in 1/2 EV steps. When the
setting is changed, you can check the result on the monitor.
1 Press cF.
• The settings screen for the exposure compensation value is displayed.
g“How to use the direct buttons” (P. 13)
2 Press ac to make
adjustments, and press Z.
• Plus [+] increases brightness and minus
[–] decreases brightness.
3 Take the picture.
TIPS
• Often bright subjects (such as snow) will turn out darker than their natural
colors. Adjust toward + to make these subjects closer to their real shades. For
the same reason, adjust toward – when taking dark subjects.
• In some situations, you may get better results when the exposure that the
camera sets is compensated (adjusted) manually.
Note
• If the flash is used, the image brightness (exposure) may differ from the
intended brightness.
• Exposure compensation cannot correct the image if the surroundings of the
subject are extremely bright or dark.
SELECT GO
OK
F
For adjusting the brightness when
you take pictures.
0.0
To Next Page
Loading...
Need help?
General
Weight and Dimensions
