Olympus FE-120 User Manual

75
6
Settings
Checking the image processing function
(PIXEL MAPPING)
The pixel mapping feature allows the camera to check and adjust the CCD and
image processing functions. It is not necessary to operate this function frequently.
Approximately once a year is recommended. Wait at least one minute after taking
or viewing pictures to allow for proper performance of the pixel mapping function.
Top menu [MODE MENU] [SETUP] [PIXEL MAPPING]
g“How to use the menus” (P. 16)
1 When [START] is displayed,
press Z.
• The [BUSY] bar is displayed during
pixel mapping. When pixel mapping is
finished, the screen returns to the
mode menu.
This function lets you adjust the brightness of the monitor to make it easier
to see the image.
Top menu [MODE MENU] [SETUP] [s]
g“How to use the menus” (P. 16)
• In : Top menu [SETUP] [s]
1 Adjust the brightness while
looking in the monitor, and when
you have set the desired level,
press Z.
• Pressing a brightens the monitor, and
pressing c darkens it.
Note
• If you turn the camera off during pixel mapping, start again from Step 1.
START
s
PIXEL MAPPING
X
PIC
CAM
MEM
SETUP
Adjusting the brightness of the monitor
s
SELECT
SELECT
GO
GO
OK
OK
SELECT GO
OK

Olympus FE-120 Specifications

General

Internal memory	32 MB
Compatible memory cards	xd
I/O ports	USB
PictBridge	Yes
Megapixel	6 MP
Camera type	Compact camera
Sensor type	CCD
Image sensor size	1/2.5 \
Digital zoom	4 x
Optical zoom	3 x
Interface	DC, USB Auto Connect
Digital SLR	No
Power source	LB-01 (CRV3)
Dimensions (WxDxH)	106 x 56 x 36 mm
Camera shutter speed	4 – 1/2000 s
Display diagonal	1.8 \
Display resolution (numeric)	- pixels
Bundled software	OLYMPUS Master
Product color	Silver
Battery type	2 x AA Ni-MH, 2 x AA Ni-Cd
Battery technology	Nickel-Metal Hydride (NiMH)
Flash modes	Auto, Fill-in, Red-eye reduction

Weight and Dimensions

Depth	56 mm
Width	106 mm
Height	36 mm
Weight	140 g