Menu operations
EN
27
All existing data, including protected pictures, are erased when the internal
memory or card is formatted. Make sure that you save or transfer important data
to a computer before formatting.
• Make sure there is no card inserted in the camera when formatting the internal
memory.
• Be sure that the card is inserted in the camera when formatting the card.
• Before using non-Olympus cards or cards which have been formatted on a
computer, you must format them with this camera.
Insert the optional card into the camera. Copying data does not erase the picture
in the internal memory.
• It takes some time to back up data. Check if the battery is not empty before
starting the copy.
You can select a language for on-screen display. Available languages vary
depending on the area where you purchased this camera.
You can add other languages to your camera with the provided OLYMPUS
Master software.
The pixel mapping feature allows the camera to check and adjust the CCD and
image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait at least one minute
after taking or viewing pictures to allow the pixel mapping function to perform
properly. If you turn the camera off during pixel mapping, start again.
Select [PIXEL MAPPING]. When [START] is displayed, press Q.
MEMORY FORMAT (FORMAT)..... Formatting the internal memory or card
BACKUP........................... Copying pictures in the internal memory to the card
W ......................................................................... Selecting a display language
PIXEL MAPPING ..............................Adjusting the image processing function
K/q......................................Turning on the camera with the K or q button
YES When K is pressed with the camera off, the camera turns on in
shooting mode. When q is pressed with the camera off, the
camera turns on in playback mode.
NO The camera does not turn on when K or q is pressed.
s ......................................................................Adjusting the monitor brightness
BRIGHT/
NORMAL
BEEP.................................................... Adjusting the volume of operation sound
when the buttons are pressed
OFF (No sound)/
LOW /HIGH
To Next Page
Need help?
General
