Omron E3Z series Network Connection Guide

5
．
Applicable Devices and Device Configuration
5
5. Applicable Devices and Device Configuration
5.1. Applicable Devices
The applicable devices are as follows:
Manufacturer Name Model
OMRON NJ-series CPU Unit NJ501-[][][][]
NJ301-[][][][]
NJ101-[][][][]
OMRON NX-series
EtherCAT Coupler Unit
NX-ECC20[]
OMRON NX-series
IO-Link Master Unit
NX-ILM[][][]
OMRON E3Z-series
IO-Link Photoelectric Sensor
E3Z-[]8[]-IL[]
Precautions for Correct Use
In this document, the devices with models and versions listed in 5.2. Device Configuration are
used as examples of applicable devices to describe the procedures for connecting the
devices and checking their connections.
You cannot use devices with versions lower than the versions listed in 5.2.
To use the above devices with models not listed in 5.2. or versions higher than those listed in
5.2., check the differences in the specifications by referring to the manuals before operating
the devices.
Additional Information
This document describes the procedures for establishing the network connections.
It does not provide information on operation, installation, wiring method, device functionality,
or device operation, which is not related to the connection procedures.
Refer to the manuals or contact the device manufacturer.

Omron E3Z series Specifications

General

Brand	Omron
Model	E3Z series
Category	Accessories
Language	English