43
USING THE MEMORY FUNCTION
TO DISPLAY THE MEASUREMENT VALUES
1. Press the MEMORY button to display the
average reading based on the three most recent
sets of measurement values taken within
10 minutes of the most recent reading. The
Average Value Symbol ( ) appears on the
display when the average reading is shown.
2. Press the ( ) button to display the set of
measurement values from the most recent to
the oldest.
Press the ( ) button to display the next set of
measurement values from the oldest to the
most recent.
3. Press the START/STOP button to turn the monitor off.
To Next Page
Loading...
Need help?
General
