Omron HEM-670IT User Manual

68
CARE AND MAINTENANCE
To keep your digital blood pressure monitor in the best condition and
protect the unit from damage, follow the directions listed below:
Keep the monitor in the storage case when not in use.
Do not fold the wrist cuff too tightly.
The fabric fastener could touch the inner surface of the cuff and damage it.
Clean the monitor with a soft dry cloth. Do not use any abrasive or
volatile cleaners. Do not attempt to clean the cuff.
CAUTION
Do not submerge the device or any of the components in water. Do
not subject the monitor to extreme hot or cold temperatures, humidity
or direct sunlight.
CAUTION
Store the device and the components in a clean, safe location.
CAUTION
Do not subject the monitor to strong shocks, such as dropping the unit
on the floor.
Remove the batteries if the unit will not be used for three months or
longer. Always replace all the batteries with new ones at the same time.
CAUTION
Use only Omron authorized parts and accessories. Parts and
accessories not approved for use with the device may damage the unit.
CAUTION
Changes or modification not approved by Omron Healthcare will void
the user warranty. Do not disassemble or attempt to repair the unit or
components.
Care and Maintenance
HEM-6040-Z_EN_SP_Q6_051507.qxd 5/15/07 12:25 PM Page 68

Omron HEM-670IT Specifications

General

Brand	Omron
Model	HEM-670IT
Category	Blood Pressure Monitor
Language	English

Summary

Introduction to the Omron Blood Pressure Monitor

IntelliSense Technology for Accuracy

Explains the IntelliSense technology for accurate measurements.

Advanced Positioning Sensor (APS)

Explains the APS sensor for correct cuff positioning.

Before Taking a Blood Pressure Measurement

Recommendations for Reliable Readings

Understanding Display Symbols

Battery Installation and Replacement

Installing New Batteries

Step-by-step guide to inserting new batteries into the monitor.

Low Battery Indicators and Warnings

Adjusting Monitor Settings

Setting the Memory Function

Automatic Memory ON/OFF

Setting the TruRead™ Measurement Function

TruRead™ Mode ON/OFF

Setting the Advanced Positioning Sensor

Position Sensor and Signal Configuration

Configures the positioning sensor and its audible signal.

Setting the Date and Time

Setting Year, Month, and Day

Setting Hour and Minute

Resetting the Blood Pressure Monitor

Applying the Wrist Cuff

Applying Cuff to Left Wrist

Detailed instructions for applying the cuff to the left wrist.

Taking a Blood Pressure Measurement

Using Single Read Mode

Instructions for taking a single blood pressure reading.

Positioning Wrist for Accurate Readings

Guidance on aligning the wrist with the heart level.

Monitoring Measurement Progress and Results

Explains symbols, stages, and how to interpret final readings.

Using TruRead™ Mode Measurements

Instructions for using the TruRead multiple measurement mode.

TruRead™ Measurement Progress and Error Handling

Using the Memory Function

Displaying Stored Measurement Values

How to view stored average and individual readings.

Morning and Evening Averages

Displaying and Interpreting Graphs

How to view and read the blood pressure graphs.

Understanding Graph Data and Symbols

Deleting All Memory Data

Steps to erase all stored measurement data from memory.

Confirming Memory Data Deletion

Installing the Omron Health Management Software

Software Overview and Registration

Software Operating Environment Requirements

Specifies system requirements for installing the software.

Software Installation Process

Instructions for inserting CD-ROM and starting the setup program.

Using the Omron Health Management Software

Accessing Software Help and Launching

Adding a New User and Selecting Program

Transferring Data to a Personal Computer

Connecting the Blood Pressure Monitor

Instructions for connecting the monitor to the PC using the USB cable.

Downloading Data from Monitor to PC

Steps to initiate data transfer from the monitor to the PC.

Software Troubleshooting Tips

Common Software Error Message Solutions

Provides solutions for common error messages during software installation.

Care and Maintenance of the Monitor

General Care and Cleaning Instructions

Error Indicators and Troubleshooting

Measurement Error Indicators Explained

Explains symbols and causes for measurement errors.

Battery and Unit Error Troubleshooting

Troubleshooting Common Monitor Problems

Solutions for issues like no power or inaccurate readings.

Product Warranty Information

Warranty Terms, Conditions, and Limitations

Technical Specifications

Omron HEM-670IT Specifications

Lists detailed technical data of the blood pressure monitor.