2 Precautions
(1) When building an actual system, check the specifications of the component devices of the system,
use within the ratings and specified performance, and implement safety measures such as safety
circuits to minimize the possibility of an accident.
(2) For safe use of the system, obtain the manuals of the component devices of the system and check
the information in each manual, including safety precautions, precautions for safe use.
(3) It is the responsibility of the customer to check all laws, regulations, and standards that the system
must comply with.
(4) All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or
otherwise, without the prior written permission of OMRON.
(5) The information in this guide is current as of December 2019. It is subject to change without notice
because of product’s update.
Special information in this document is classified as follows:
Precautions for Safe Use
It describes precautions on what to do and what not to do to ensure safe usage of the product.
Precautions for Correct Use
It describes precautions on what to do and what not to do to ensure proper operation and
performance.
Additional Information
Additional information to read as required.
This information is provided to increase understanding or make operation easier.
Copyrights and Trademarks
⚫ Sysmac® is a trademark or registered trademark of Omron Corporation in Japan and other
countries for Omron factory automation products.
⚫ Screenshots are used in accordance with Microsoft Corporation guidelines.
⚫ Windows and Visual Basic are the registered trademarks of Microsoft Corporation in the USA
and other countries.
⚫ EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff
Automation GmbH, Germany.
⚫ EtherNet/IP™ is the registered trademark of ODVA, Inc.
⚫ Company names and product names in this document are the trademarks or registered
trademarks of their respective companies.