Omron NX102 series Network Connection Guide

8．Initialization Method
42
5) The Clear All Memory for Coupler Dialog Box is displayed. Check that Coupler + NX Units is
selected. Click Execute.
Precautions for Correct Use
In the initialization of a Slave Terminal, the backup data of IO-Link devices that is stored in an
IO-Link Master Unit is not cleared. If you wish to clear the backup data stored in the IO-Link
Master Unit, refer to 7-6-5 Clearing Backup Data of the IO-Link System User's Manual (Cat.
No. W570).

Omron NX102 series Specifications

General

Brand	Omron
Model	NX102 series
Category	Controller
Language	English