Omron NX102 series Network Connection Guide

5．Applicable Devices and Device Configuration
6
5.2. Device Configuration
The hardware components to reproduce the connection procedures in this guide are as
follows:
Manufacturer
Name
Model
Version
OMRON
NX-series CPU Unit
(Built-in EtherCAT port)
NX102-1200
Ver.1.31
－
Power supply (24 VDC for Controller)
－
OMRON
Sysmac Studio
SYSMAC-SE2□□□
Ver.1.25
OMRON
CX-ConfiguratorFDT
(Provided in Sysmac
Studio package)
Ver.2.5
－
IODD DTM Configurator
(Provided in Sysmac
Studio package)
Ver.3.5
－
Personal computer (OS: Windows 10)
－
－
LAN cable (STP (shielded,
twisted-pair) cable of Ethernet
category 5 or higher)
－
OMRON
Ethernet cable
(with industrial Ethernet connector)
XS5W-T421-□M□-K
OMRON
NX-series EtherCAT Coupler Unit
NX-ECC202
Ver.1.2
OMRON
NX-series IO-Link Master Unit
NX-ILM400
Ver.1.1
－
Unit power supply (24 VDC)
－
－
I/O power supply (24 VDC)
－
－
Communication cable (with a
connector on one end (M12 / 5 pins))
－
PATLITE
Signal Tower
LR6-3ILWMNW-RYG
Ver.1.00
PATLITE
IODD file
Patlite-LR6-IL-20190110-I
ODD1.1.xml
(Patlite-LR6-IL-20190110-I
ODD1.1.zip)
Precautions for Correct Use
Contact PATLITE Corporation to obtain the IODD file specified above before proceeding.
Ethernet cable
NX-ECC202 +
NX-ILM400
Personal computer
(Sysmac Studio,
CX
-ConfiguratorFDT and
IODD DTM Configurator
installed,
OS: Windows 10)
Unit power supply
LR6-3ILWMNW-RYG
Communication
cable
LAN cable
NX102-1200
(Built-in EtherCAT port)
Power
supply
I/O power supply

Omron NX102 series Specifications

General

Brand	Omron
Model	NX102 series
Category	Controller
Language	English