Omron NX502-1 Series User Manual

2-4
FINS Routing Table Setting
The routing table is a table that is used to find the communication path of the FINS message when the
FINS communication service is in use.
The routing table consists of two types of tables: local network table and relay network table.
Here are the cases, where the setting of FINS routing table is required.
• When the FINS routing table is already set at one or more nodes in the same network and the FINS
message communications are performed, the local network table setting is required.
For details, refer to A-1 Difference Between CS/CJ-series and NX-series in FINS Routing on page
A-2.
• When the FINS command is issued over the level of the FINS network, the relay network table set-
ting is required.
To set the FINS routing table, select Configurations and Setup - Controller Setup - Operation
Settings - FINS Settings from the Multiview Explorer of the Sysmac Studio.
2 Server Function
2-7
NX-series CPU Unit FINS Function User's Manual (W596)
2-4 FINS Routing Table Setting
2

Omron NX502-1 Series Specifications

General

Brand	Omron
Model	NX502-1 Series
Category	Controller
Language	English