Omron NX502-1 Series User Manual

2-5
FINS Write Protection Function
When data is written into the CPU Unit using the FINS command, this data writing can be disabled so
that the data is not written into the memory of the CPU Unit.
This function is called the FINS write protection function.
The models that support the FINS write protection function are NX701-££20, 502-1£££, and
NX102-££££.
To set whether to use the write protection function, select Configurations and Setup - Controller
Setup - Operation Settings - FINS Settings - Security Settings from the Multiview Explorer of the
Sysmac Studio.
Even when the FINS write protection function is enabled, the data reading from the CPU Unit is still
possible.
For details, refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504).
2 Server Function
2-8
NX-series CPU Unit FINS Function User's Manual (W596)

Omron NX502-1 Series Specifications

General

Brand	Omron
Model	NX502-1 Series
Category	Controller
Language	English