Omron ZFX-C Command Reference

Example of Usage
56
ZFX-C Serial Communication Command Reference
Example of Usage
The following describes an example procedure to communicate by non-procedural commands using Windows
standard tool HyperTerminal.
1 Start up HyperTerminal.
HyperTerminal is located under [Program]-[Accessory]-[Communication].
1-1 Enter an appropriate project name, and select OK.
1-2 Select the COM port connected to the ZFX-C in the Connect using field.

Omron ZFX-C Specifications

General

Brand	Omron
Model	ZFX-C
Category	Accessories
Language	English